| FC-280 good Performance OEM Rated voltage 15v dc motor | L Dimension Tolerance:+0.000/-0.005; L(inch):0.125 ～ 2; Days to Ship:8 Days; RoHS:6; |
| BE8108 8108 100KV high torque rc brushless dc motor factory | S:15.9 mm; A2:39.2 mm; e:17 mm; L:83 mm; s1:19.05 mm; Recommended tightening torque for set screw:5.5 Nm; N:11,5mm; H:142 mm; G:R1/8"; Weight:0.92 kg; |
| Toshiba LV Electric Motor | A2:35 mm; Dz:95 mm; Recommended tightening torque for set screw:8 Nm; N2:49 mm; Designation of housing:T209N-; s1:24.6 mm; SW:3.97 mm; L:144 mm; Designation of bearing:UC209-28G2; T min.:-20 °C; |
| Hot Selling drone A2212 10T 1400KV Brushless Motor for RC Airplane Multicopter F450 S500 | Surface Treatment:No; Basic Load Rating, Dynamic Rating(N):25700; Unit Body Material:Cast Iron; Accessory:No Cover; Pillow Type, Category:Standard; Days to Ship:8 Days; Bearing Unit, Type:Pillow Type; Bearing Inner Dia. Shape:Tapered hole adapter; |
| 4mm Soderable Mounted Vibration Motor-2.7v 14000rpm | d:23.81 mm; H:130 mm; J:99 mm; C0:7.88 kN; s1:17 mm; Recommended tightening torque for set screw:3.7 Nm; e:16 mm; A:27 mm; A1:13 mm; N:16mm; |
| S020 Electric Toy Factory Directly DC Brush Motor | G:R1/8"; A5:18.3 mm; Recommended tightening torque for set screw:3.7 Nm; T max.:200 °C; C0:6.65 kN; L:264 mm; d:19.05 mm; B:31 mm; s1:15.5 mm; C:12.8 kN; |
| High Power DC Worm Gear Motor with Double Output Shafts | D:95 mm; Nref:7,600 rpm; D1:85.9 mm; f0:15.4; Characteristic inner ring frequency, BPFI:7.41 Hz; d:60 mm; Fatigue limit load, Cu:1.1 kN; Radial clearance class:CN; Min operating temperature, Tmin:-40 °C; Characteristic outer ring frequency, BPF0:5.59 Hz; |
| 4Kw 5Kw 7.5Kw 10Kw brushless DC motor | Seals:DD (Contact Rubber S; Width T(mm):10; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Bearing Part Number:625; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; RoHS:6; |
| Cheap electric motors 180 dc motor | Housing Material:1045 Carbon Steel; Number of Bearings:Double; Bearing Retained:Yes (with retaining; Bearing I.D. d(mm):15; Bearing Part Number:6002; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Flange Shape:Compact Type; Holder Surface Treatment:Black Oxide Coating; Days to Ship:7 Days; |
| Hybrid Stepper Motors | s1:19.05 mm; Designation of housing:FC206N-; B:38.1 mm; H3:80; A2:32.2 mm; e:10 mm; Designation of bearing:UC206-18G2T20; T min.:-20 °C; d:28.58 mm; C:19.5 kN; |