| Belt Installation Tool Gates 91031 | da min.:122 mm; (Grease) Lubrication Speed:2 800 r/min; Db max:193 mm; Outer Diameter (mm):200; 2B:76 mm; Bore Diameter (mm):110; Bearing number:7222DB; r min.:2,1 mm; Basic static load rating (C0):315 kN; C:38 mm; Angle (α):25 °; B:38 mm; ra1 max.:1 mm; r1 min.:1,1 mm; a:64 mm; Size (mm):110x200x38; d:110 mm; Basic dynamic load rating (C):276 kN; Weight:8,9 Kg; ra max.:2 mm; |
| Belt Installation Tool fits 2008-2017 Subaru Impreza Forester Outback GATES | finish/coating:Black Oxide; series:Metric CAMROL (; roller width:24 mm; roller diameter:52 mm; radial dynamic load capacity:3991 lbs; stud diameter:20 mm; roller shape:Crowned; closure type:Open; bearing element:Needle Rollers; head type:Slotted; roller material:Chrome Steel; lubrication hole location:Stud Side, Stud End; stud type:Standard; radial static load capacity:6700 lbs; maximum rpm:3900 rpm; |
| Belt Installation Tool Gates 91031 | d:4 mm; manufacturer product page:Click here; operating temperature range:-22 to 248 °F; lubrication type:Non-Lubricatable; race material:Brass; overall height:37 mm; Weight:0.02 lbs; shank thread size:M4 x 0.7; head diameter:14 mm; ball material:Chrome Steel; misalignment angle:14 °; rod end type:Male Threaded; manufacturer upc number:637400281656; thread type:Metric; thread direction:Right Hand; |
| Belt Installation Tool Gates 91031 | Width (mm):70; d:110 mm; Size (mm):110x180x70; B1:100 mm; Bearing number:110FSH180; Bore Diameter (mm):110; Outer Diameter (mm):180; d1:160 mm; D:180 mm; C:70 mm; |
| Belt Installation Tool Gates 91031 | Da max.:390 mm; Bearing No.:29356; Ca:2200; r(min):5; Da(max):390; d:280 mm; C:46 mm; Size (mm):280x440x95; Weight:532 Kg; D1:348 mm; Width (mm):95; Bore Diameter (mm):280; ra max.:4 mm; D:440 mm; B1:91 mm; B:32 mm; d1:423 mm; T:95 mm; Bearing number:29356; r min.:5 mm; |
| Gates 91031 Belt Installation Tool | end type:Open; overall height:3.6800 in; manufacturer product page:Click here; locking device:Single Concentric Co; duty type:Heavy Duty; D:5.3000 in; pilot diameter:6.3750 in; housing material:Cast Steel; lubrication type:Lubrication Fitting; bore type:Round; radial dynamic load capacity:49900 lbs; bearing type:Spherical Roller; d:2.6875 in; finish / coating:Powder coat; seal type:Labyrnith non-contac; |
| Belt Installation Tool Gates 91031 | d:280 mm; Bearing number:32956; Calculation factor (e):0,43; Weight:19,81 Kg; T:63,5 mm; R:3 mm; Size (mm):280x380x63.5; C:48 mm; Dynamic load rating radial (C):850 kN; Width (mm):63,5; B:63,5 mm; Outer Diameter (mm):380; Bore Diameter (mm):280; D:380 mm; r:2,5 mm; |
| Belt Installation Tool Gates 91031 | Material:52100 Chrome steel (; Static Load Rating (Cor):249,100; Bearing number:71936C; Dynamic Load Rating (Cr):159,700; Outer Diameter (mm):250; Max Speed (Oil) (X1000 RPM):7; Width (B):33.0000; Bearing Type:15 deg contact angle; Bore Dia (d):180.0000; Max Speed (Grease) (X1000 RPM):5; Bore Diameter (mm):180; Radius (min) (rs):2.000; Size (mm):180x250x33; Radius (min) (rs1):1.000; Outer Dia (D):250.0000; |
| Belt Installation Tool Gates 91031 | D:125 mm; Bearing number:2LA-HSE918G/GNP42; Angle (α):20 °; Size (mm):90x125x18; C:18 mm; Outer Diameter (mm):125; Bore Diameter (mm):90; B:18 mm; d:90 mm; Width (mm):18; |
| Gates for Subaru Micro-V Stretch Fit Belt Installation Tool - gat91031 | C:25,5 mm; Width (mm):31; Size (mm):75x115x31; D:115 mm; T:31 mm; d:75 mm; Bore Diameter (mm):75; Outer Diameter (mm):115; Bearing number:33015; a:23 mm; B:31 mm; |
| Gates 91031 Micro-V Stretch Fit Installation Tool | finish/coating:Uncoated; expansion type:Non-Expansion Bearin; locking device:Single Set Screw; pilot diameter:10.2500 in; lubrication type:Lubrication Fitting; operating temperature range:Max 250°; seal type:Felt Seal; D:5.8800 in; series:RFPA Series; manufacturer catalog number:554590; d:4.4375 in; bearing type:Tapered Roller; bore type:Round; housing material:Cast Iron; B:13.5000 in; bolt size:0.7500 in; |
| Belt Installation Tool for WRX STI, WRX, Impreza, Forester, Outback, 3, 5 91031 | Width (mm):35,000; d:70,000 mm; D:150,000 mm; B:35,000 mm; Bore Diameter (mm):70,000; Bearing number:NU314EM; Outer Diameter (mm):150,000; C:35,000 mm; Size (mm):70x150x35; |
| Belt Installation Tool Gates 91031 | ra(max):1; Size (mm):35x72x17; B1:-; B:17 mm; C:17 mm; r(min):1.1; Cu:4.70; Ew:61.8 mm; Bore Diameter (mm):35; Width (mm):17; Db(max):68; (Refer.)Mass(kg):0.300; r min.:1.1 mm; Outer Diameter (mm):72; db(max):-; Bearing No.:NF207; r1(min):0.6; D:72 mm; Da(max):-; C0r:31.5; |
| Belt Installation Tool Gates 91031 | precision rating:Not Rated; internal clearance:C3; D:270 mm; inner ring width:111 mm; maximum rpm:1900 RPM; finish/coating:Uncoated; outer ring width:73 mm; static load capacity:1200 kN; series:222; outer ring type:Split; closure type:Open; dynamic load capacity:850 kN; lubrication hole type:No Holes; bore type:Tapered 1:12; fillet radius:3 mm; d:150 mm; B:111 mm; |
| No. | Brand | r | C | B | W | K | L | R | M |
| 91031 | - | - | 38 mm | 38 mm | - | - | - | - | - |
| 91031 | - | - | - | - | - | - | - | - | - |
| 91031 | - | - | 46 mm | 46 mm | - | - | - | - | - |
| 91031 | - | - | 17 mm | 17 mm | - | - | - | - | - |
| 91031 | - | 2,5 mm | 48 mm | 63,5 mm | - | - | - | 3 mm | - |
| 91031 | - | - | - | - | - | - | - | - | - |
| 91031 | - | - | 2,6 mm | 25,4 mm | 85,7 mm | 9,5 mm | 28,6 mm | 28 mm | 68 mm |
| 08-11 | - | - | 3,5 mm | 3,5 mm | - | - | - | - | - |
| 91031 | - | - | - | - | - | - | - | - | - |
| 91031 | - | - | - | - | - | - | - | - | - |
| 91031 | - | - | - | - | - | - | - | - | - |
| 08-11 | - | - | - | - | - | - | - | - | - |
| 91031 | - | - | 16,66875 mm | 16,66875 mm | - | - | - | - | - |
| 2008-2017 | - | - | - | - | - | - | - | - | - |
| 91031 | - | - | - | - | - | - | - | - | - |
| 91031 | - | - | - | - | - | - | - | - | - |
| 91031 | - | - | - | 21 mm | - | - | - | - | - |
| 91031 | - | - | - | - | - | - | - | - | - |
| 91031 | - | - | 13 mm | 13 mm | - | - | - | - | - |
| gat91031 | - | - | 25,5 mm | 31 mm | - | - | - | - | - |
| 91031 | - | - | - | 25,4 mm | - | - | - | - | - |
| 91031 | - | - | - | - | - | - | - | - | - |
| 91031 | - | - | 100 mm | - | - | - | - | - | - |
| 3, | - | - | 35,000 mm | 35,000 mm | - | - | - | - | - |
| 91031 | - | - | 18 mm | 18 mm | - | - | - | - | - |
| 91031 | - | - | - | - | - | - | - | - | - |
| 91031 | - | - | - | - | - | - | - | - | - |
| 91031 | - | - | - | 13.5000 in | - | - | - | - | - |
| 91031 | - | - | 70 mm | - | - | - | - | - | - |
| 91031 | - | - | 60 mm | 60 mm | - | - | - | - | - |
Belt Installation Tool Gates 91031 Video
Gates Tool/Accessory 91031 | O'Reilly Auto Parts
Find the right Gates Tool/Accessory for your vehicle at O'Reilly Auto Parts. Place your order online and pick it up at your local store for free.
Subaru Stretch Fit Belt Tool | Gates Corporation
91031 SUBARU STRETCH FIT TOOL. Product # 74680022. Designed to assist in the installation of streetch fit belts on certain Subaru applications.
Micro-V Stretch Fit Installation Tool - Gates 91031
Micro-V Stretch Fit Installation Tool - Gates 91031 ... The 2011-2008 Subaru Impreza, Forester and Outback with 2.5L engines utilize Stretch Fit belt technology ...
Gates 91031 Micro-V Stretch Fit Installation Tool, Black
Gates patented strap wrench is specifically designed to grasp and hold automotive SAE Micro-V belt driven pulleys. The Micro-V wrench grasps the pulley just ...
GATES 91031 Belt Installation Tool - RockAuto
RockAuto ships auto parts and body parts from over 300 manufacturers to customers' doors worldwide, all at warehouse prices. Easy to use parts catalog.
Gates 91031 Subaru Stretch Belt Installation Fitting ... - eBay
Find many great new & used options and get the best deals for Gates 91031 Subaru Stretch Belt Installation Fitting Removal Tool at the best online prices at ...
Gates Belt Installation Tool 91031 - The Home Depot
Installation tool for Gates Stretch Fit belts. The belt can be damaged if the right tools are not used. Internet #308384199. Model #91031.