| Belt Installation Tool Gates 91031 | d:280 mm; Bearing number:32956; Calculation factor (e):0,43; Weight:19,81 Kg; T:63,5 mm; R:3 mm; Size (mm):280x380x63.5; C:48 mm; Dynamic load rating radial (C):850 kN; Width (mm):63,5; B:63,5 mm; Outer Diameter (mm):380; Bore Diameter (mm):280; D:380 mm; r:2,5 mm; |
| Belt Installation Tool Gates 91031 | Material:52100 Chrome steel (; Static Load Rating (Cor):249,100; Bearing number:71936C; Dynamic Load Rating (Cr):159,700; Outer Diameter (mm):250; Max Speed (Oil) (X1000 RPM):7; Width (B):33.0000; Bearing Type:15 deg contact angle; Bore Dia (d):180.0000; Max Speed (Grease) (X1000 RPM):5; Bore Diameter (mm):180; Radius (min) (rs):2.000; Size (mm):180x250x33; Radius (min) (rs1):1.000; Outer Dia (D):250.0000; |
| Gates Corporation 91031 Belt Installation Tool Micro V Stretch Fit | Bearing number:51272 M; Width (mm):110; Bore Diameter (mm):360; (Grease) Lubrication Speed:536 r/min; D1:365 mm; d:360 mm; Weight:70 Kg; Basic dynamic load rating (C):726 kN; D:500 mm; Outer Diameter (mm):500; H:110 mm; Basic static load rating (C0):4067 kN; d1:495 mm; Size (mm):360x500x110; |
| Belt Installation Tool Gates 91031 | Bore Diameter (mm):40; A:40 mm; e:24 mm; Weight:2,4 Kg; A2:50 mm; B:50 mm; Basic dynamic load rating (C):31,85 kN; d:40 mm; s1:26 mm; N:14 mm; L:137 mm; J:105 mm; Thread (G):R1/8"; D2:65 mm; Bearing number:UKFE209H; A1:13 mm; |
| Belt Installation Tool Gates 91031 | D:75 mm; Fw:50 mm; Weight:0,46 Kg; Size (mm):50x75x100; Bearing number:LBCR 50 A-2LS; Outer Diameter (mm):75; Bore Diameter (mm):50; C3:72 mm; C:100 mm; Basic dynamic load rating (C):13,4 kN; Width (mm):100; |
| Belt Installation Tool Gates 91031 | Internal Special Features:Silicon Nitride Roll; Size (mm):110x50x25; Manufacturer Name:SKF; Snap Ring:No; Width (mm):25; D:110 mm; d:50 mm; Calculation factor - kr:0.025; Calculation factor f0:13; Basic static load rating - C0:31.5 kN; Fatigue load limit Pu:1.6 kN; Enclosure Type:Contact Seal; Outer Race Width:1.063 Inch | 27 Mill; Minimum Buy Quantity:N/A; Category:Single Row Ball Bear; da - min.:61 mm; |
| Belt Installation Tool Gates 91031 | Da max.:390 mm; Bearing No.:29356; Ca:2200; r(min):5; Da(max):390; d:280 mm; C:46 mm; Size (mm):280x440x95; Weight:532 Kg; D1:348 mm; Width (mm):95; Bore Diameter (mm):280; ra max.:4 mm; D:440 mm; B1:91 mm; B:32 mm; d1:423 mm; T:95 mm; Bearing number:29356; r min.:5 mm; |
| Belt Installation Tool Gates 91031 | H:43,2 mm; Width (mm):25,4; Bore Diameter (mm):15; C:2,6 mm; B1:18,4 mm; A:22,2 mm; Bearing number:PB15; M:68 mm; R:28 mm; L:28,6 mm; K:9,5 mm; d:15 mm; W:85,7 mm; B:25,4 mm; |
| One New Gates Belt Installation Tool 91031 for Subaru Forester Impreza | bearing element:Needle Rollers; roller diameter:3.0000 in; roller width:1.7500 in; stud diameter:1.5000 in; radial dynamic load capacity:20200 lb; head type:Slotted; stud type:Heavy; stud length:2.5000 in; roller material:Steel; roller shape:Flat; closure type:Open; |
| Belt Installation Tool fits 2008-2017 Subaru Impreza Forester Outback GATES | finish/coating:Black Oxide; series:Metric CAMROL (; roller width:24 mm; roller diameter:52 mm; radial dynamic load capacity:3991 lbs; stud diameter:20 mm; roller shape:Crowned; closure type:Open; bearing element:Needle Rollers; head type:Slotted; roller material:Chrome Steel; lubrication hole location:Stud Side, Stud End; stud type:Standard; radial static load capacity:6700 lbs; maximum rpm:3900 rpm; |
| Belt Installation Tool Gates 91031 | ra(max):1; Size (mm):35x72x17; B1:-; B:17 mm; C:17 mm; r(min):1.1; Cu:4.70; Ew:61.8 mm; Bore Diameter (mm):35; Width (mm):17; Db(max):68; (Refer.)Mass(kg):0.300; r min.:1.1 mm; Outer Diameter (mm):72; db(max):-; Bearing No.:NF207; r1(min):0.6; D:72 mm; Da(max):-; C0r:31.5; |
| Gates Subaru Micro-V Stretch Fit Belt Installation Tool | inner ring width:2.0310 in; D:4.3750 in; manufacturer catalog:Click here; manufacturer upc number:8865590386697; mounting type:Four-Bolt Flange; bore type:Round; d:1.9375 in; expansion type:Non-Expansion Bearin; seal type:FDA approved silicon; finish/coating:Stainless Steel; duty type:Standard Duty; locking device:Set Screw; lubrication type:Lubrication Fitting; bolt size:0.5000 in; housing material:Stainless Steel; |
| Belt Installation Tool Gates 91031 | maximum p value:3000 psi; material specification:SAE 660 (C932&#; D:3-1/8 in; maximum v value:750 fp/min; overall length:5 in; sleeve bearing type:Plain Sleeve; bearing material:Leaded-Tin Bronze; operating temperature range:Maximum of +800; groove/plug type:None; standards met:ASTM B584-78; maximum pv value:75000; d:2-5/8 in; |
| Belt Installation Tool Gates 91031 | manufacturer product page:Click here; seal type:Contact; d:12 mm; series:MU000; bearing material:440C Stainless Steel; bore type:Round; D:28 mm; radial dynamic load capacity:440 kgf; inner ring width:17.5 mm; locking device:Eccentric Collar; outer ring width:8 mm; radial static load capacity:195 kgf; |
| No. | Brand | r | C | B | W | K | L | R | M |
| 91031 | - | - | 17 mm | 17 mm | - | - | - | - | - |
| 91031 | - | - | - | - | - | - | - | - | - |
| 91031 | - | - | - | - | - | - | - | - | - |
| 91031 | - | - | 45 mm | 45 mm | - | - | - | - | - |
| 91031 | - | 2,5 mm | 48 mm | 63,5 mm | - | - | - | 3 mm | - |
| 91031 | - | - | - | - | - | - | - | - | - |
| 91031 | - | - | - | - | - | - | - | - | - |
| 91031 | - | - | - | 111 mm | - | - | - | - | - |
| 91031 | - | - | - | - | - | - | - | - | - |
| 08-11 | - | - | - | - | - | - | - | - | - |
| 91031 | - | - | - | 3.5313 in | - | - | - | - | - |
| 91031 | - | - | 2,6 mm | 25,4 mm | 85,7 mm | 9,5 mm | 28,6 mm | 28 mm | 68 mm |
| 91031 | - | - | - | 50 mm | - | - | 137 mm | - | - |
| 91031 | - | - | - | - | - | - | - | - | - |
| 91031 | - | - | - | - | - | - | - | - | - |
| 91031 | - | - | - | - | - | - | - | - | - |
| 91031 | - | - | - | 13.5000 in | - | - | - | - | - |
| 91031 | - | - | 18 mm | 18 mm | - | - | - | - | - |
| 91031 | - | - | 100 mm | - | - | - | - | - | - |
| 91031 | - | - | 38 mm | 38 mm | - | - | - | - | - |
| 91031 | - | - | - | - | - | - | - | - | - |
| 91031 | - | - | - | - | - | - | - | - | - |
| 91031 | - | - | - | 8.7500 in | - | - | - | - | - |
| 91031 | - | - | 13 mm | 13 mm | - | - | - | - | - |
| 91031 | - | - | 16,66875 mm | 16,66875 mm | - | - | - | - | - |
| 91031 | - | - | 60 mm | 60 mm | - | - | - | - | - |
Belt Installation Tool Gates 91031 Video
Gates Belt Installation Tool 91031 - The Home Depot
Installation tool for Gates Stretch Fit belts. The belt can be damaged if the right tools are not used. Internet #308384199. Model #91031.
Subaru Stretch Fit Belt Tool | Gates Corporation
91031 SUBARU STRETCH FIT TOOL. Product # 74680022. Designed to assist in the installation of streetch fit belts on certain Subaru applications.
Gates 91031 Subaru Stretch Belt Installation Fitting ... - eBay
Find many great new & used options and get the best deals for Gates 91031 Subaru Stretch Belt Installation Fitting Removal Tool at the best online prices at ...
Gates Tool/Accessory 91031 | O'Reilly Auto Parts
Find the right Gates Tool/Accessory for your vehicle at O'Reilly Auto Parts. Place your order online and pick it up at your local store for free.
GATES 91031 Belt Installation Tool - RockAuto
RockAuto ships auto parts and body parts from over 300 manufacturers to customers' doors worldwide, all at warehouse prices. Easy to use parts catalog.
Micro-V Stretch Fit Installation Tool - Gates 91031
Micro-V Stretch Fit Installation Tool - Gates 91031 ... The 2011-2008 Subaru Impreza, Forester and Outback with 2.5L engines utilize Stretch Fit belt technology ...
Gates 91031 Micro-V Stretch Fit Installation Tool, Black
Gates patented strap wrench is specifically designed to grasp and hold automotive SAE Micro-V belt driven pulleys. The Micro-V wrench grasps the pulley just ...