| Belt Installation Tool Gates 91031 | H:870 mm; E:870 mm; D1:882,65 mm; Size (mm):785.812x952.5x95.25; d:785,812 mm; d1:857,25 mm; Outer Diameter (mm):952,5; Width (mm):95,25; T:95,25 mm; Bore Diameter (mm):785,812; D:952,5 mm; Bearing number:309TVL707; |
| Gates 91031 Belt Installation Tool for 93878 NBH517 Engine Shop Service wq | bore type:Round; operating temperature range:30 to 180°F; mounting type:Two-Bolt Flange; locking device:Set Screw; duty type:Standard Duty; end type:Optional Cap; seal type:Single Lip Contact; d:1.2500 in; bolt size:0.5625 in; B:3.5313 in; lubrication type:Lubrication Fitting; housing width:3.5313 in; bearing material:400 Stainless Steel; housing material:Nolu®-Clean; expansion type:Non-Expansion Bearin; |
| Belt Installation Tool Gates 91031 | Width (mm):46; Bearing number:61880-M; Size (mm):400x500x46; r2 min.:2,1 mm; B:46 mm; d:400 mm; Weight:20,5 Kg; C:46 mm; D:500 mm; Bore Diameter (mm):400; Basic dynamic load rating (C):248 kN; r1 min.:2,1 mm; Basic static load rating (C0):380 kN; Outer Diameter (mm):500; |
| Gates 91031 Belt Installation Tool | end type:Open; overall height:3.6800 in; manufacturer product page:Click here; locking device:Single Concentric Co; duty type:Heavy Duty; D:5.3000 in; pilot diameter:6.3750 in; housing material:Cast Steel; lubrication type:Lubrication Fitting; bore type:Round; radial dynamic load capacity:49900 lbs; bearing type:Spherical Roller; d:2.6875 in; finish / coating:Powder coat; seal type:Labyrnith non-contac; |
| Belt Installation Tool Gates 91031 | Da max.:390 mm; Bearing No.:29356; Ca:2200; r(min):5; Da(max):390; d:280 mm; C:46 mm; Size (mm):280x440x95; Weight:532 Kg; D1:348 mm; Width (mm):95; Bore Diameter (mm):280; ra max.:4 mm; D:440 mm; B1:91 mm; B:32 mm; d1:423 mm; T:95 mm; Bearing number:29356; r min.:5 mm; |
| Gates Belt Stretch Fit Installation Tool for 08-11 Impreza, Outback, Forester | Bore Diameter (mm):8; Width (mm):3,5; Basic dynamic load rating (C):0,515 kN; (Grease) Lubrication Speed:38 000 r/min; da max:9,1 mm; Bearing number:678AZZ; da min.:8,8 mm; d:8 mm; ra max.:0,1 mm; B:3,5 mm; r min.:0,1 mm; Outer Diameter (mm):12; Basic static load rating (C0):0,252 kN; Da max.:11,2 mm; D:12 mm; C:3,5 mm; Weight:0,86 Kg; Size (mm):8x12x3.5; |
| Gates For 08-11 Outback / Forester / Impreza Stretch Fit Belt Installation 91031 | Designation FAG:713630130; Bearing number:CX147; Designation Ruville:5510; Designation SNR:R155.10; Designation SKF:VKBA 636; |
| Belt Installation Tool Gates 91031 | precision rating:Not Rated; internal clearance:C3; D:270 mm; inner ring width:111 mm; maximum rpm:1900 RPM; finish/coating:Uncoated; outer ring width:73 mm; static load capacity:1200 kN; series:222; outer ring type:Split; closure type:Open; dynamic load capacity:850 kN; lubrication hole type:No Holes; bore type:Tapered 1:12; fillet radius:3 mm; d:150 mm; B:111 mm; |
| Shop on eBay | part type:Bushing; compatible bearing part number:21220Z; compatible bore diameter:1-1/4 in; |
| Gates Subaru Micro-V Stretch Fit Belt Installation Tool | inner ring width:2.0310 in; D:4.3750 in; manufacturer catalog:Click here; manufacturer upc number:8865590386697; mounting type:Four-Bolt Flange; bore type:Round; d:1.9375 in; expansion type:Non-Expansion Bearin; seal type:FDA approved silicon; finish/coating:Stainless Steel; duty type:Standard Duty; locking device:Set Screw; lubrication type:Lubrication Fitting; bolt size:0.5000 in; housing material:Stainless Steel; |
| Belt Installation Tool Gates 91031 | manufacturer upc number:053893619583; abma precision rating:Class 2; d:9.2500 in; bearing material:Steel; |
| Gates Micro-V Stretch Fit Belt Installation Tool Fits | Internal Clearance:C0-Medium; da min.:25 mm; Enclosure:Open; Harmonized Tariff Code:8482.10.50.68; Da max.:37 mm; (Grease) Lubrication Speed:17000 r/min; Factor fo:14.5; Dynamic Load Rating:7,900 N; Limiting Speed - Oil:21,000 rpm; Category:Single Row Ball Bear; ra (max):0.3 mm; Inventory:0.0; Internal Special Features:No; Basic dynamic load rating (C):7,9 kN; Fillet Radius/Chamfer:0.3 mm; Minimum Buy Quantity:N/A; |
| Belt Installation Tool Gates 91031 | da min.:122 mm; (Grease) Lubrication Speed:2 800 r/min; Db max:193 mm; Outer Diameter (mm):200; 2B:76 mm; Bore Diameter (mm):110; Bearing number:7222DB; r min.:2,1 mm; Basic static load rating (C0):315 kN; C:38 mm; Angle (α):25 °; B:38 mm; ra1 max.:1 mm; r1 min.:1,1 mm; a:64 mm; Size (mm):110x200x38; d:110 mm; Basic dynamic load rating (C):276 kN; Weight:8,9 Kg; ra max.:2 mm; |
| Belt Installation Tool - Gates 91031 (12 Month 12,000 Mile Limited Warranty) | radial dynamic load capacity:41500 lb; manufacturer catalog number:070387; housing material:Cast Iron; expansion type:Expansion Bearing &#; lubrication type:Lubrication Fitting; replacement bearing:22215; overall length:10.4375 in; finish/coating:Black Oxide; housing construction:Solid Pillow Block; series:S-2000; duty type:Standard Duty; bore type:Round; base to bore centerline:3.2500 in; bearing type:Spherical Roller; |
| No. | Brand | r | C | B | W | K | L | R | M |
| 08-11 | - | - | - | - | - | - | - | - | - |
| 91031 | - | - | - | - | - | - | - | - | - |
| 91031 | - | - | - | 13.5000 in | - | - | - | - | - |
| 91031 | - | - | 70 mm | - | - | - | - | - | - |
| 91031 | - | - | - | - | - | - | - | - | - |
| 08-11 | - | - | 3,5 mm | 3,5 mm | - | - | - | - | - |
| 3, | - | - | 35,000 mm | 35,000 mm | - | - | - | - | - |
| 91031 | - | - | - | - | - | - | - | - | - |
| 91031 | - | - | 46 mm | 46 mm | - | - | - | - | - |
| 91031 | - | 2,5 mm | 48 mm | 63,5 mm | - | - | - | 3 mm | - |
| 91031 | - | - | - | 21 mm | - | - | - | - | - |
| 91031 | - | - | - | - | - | - | - | - | - |
| 91031 | - | - | 38 mm | 38 mm | - | - | - | - | - |
| 2008-2017 | - | - | - | - | - | - | - | - | - |
| 91031 | - | - | 100 mm | - | - | - | - | - | - |
| 91031 | - | - | - | - | - | - | - | - | - |
| 91031 | - | - | 45 mm | 45 mm | - | - | - | - | - |
| 91031 | - | - | - | 25,4 mm | - | - | - | - | - |
| 91031 | - | - | - | 111 mm | - | - | - | - | - |
| 91031 | - | - | - | - | - | - | - | - | - |
| 91031 | - | - | - | - | - | - | - | - | - |
| 91031 | - | - | 17 mm | 17 mm | - | - | - | - | - |
| 91031 | - | - | - | 8.7500 in | - | - | - | - | - |
| 91031 | - | - | - | - | - | - | - | - | - |
| 91031 | - | - | - | - | - | - | - | - | - |
| 91031 | - | - | - | 50 mm | - | - | 137 mm | - | - |
| gat91031 | - | - | 25,5 mm | 31 mm | - | - | - | - | - |
| 91031 | - | - | - | - | - | - | - | - | - |
| 91031 | - | - | - | - | - | - | - | - | - |
Belt Installation Tool Gates 91031 Video
Gates 91031 Micro-V Stretch Fit Installation Tool, Black
Gates patented strap wrench is specifically designed to grasp and hold automotive SAE Micro-V belt driven pulleys. The Micro-V wrench grasps the pulley just ...
Gates Tool/Accessory 91031 | O'Reilly Auto Parts
Find the right Gates Tool/Accessory for your vehicle at O'Reilly Auto Parts. Place your order online and pick it up at your local store for free.
Gates 91031 Subaru Stretch Belt Installation Fitting ... - eBay
Find many great new & used options and get the best deals for Gates 91031 Subaru Stretch Belt Installation Fitting Removal Tool at the best online prices at ...
GATES 91031 Belt Installation Tool - RockAuto
RockAuto ships auto parts and body parts from over 300 manufacturers to customers' doors worldwide, all at warehouse prices. Easy to use parts catalog.
Gates Belt Installation Tool 91031 - The Home Depot
Installation tool for Gates Stretch Fit belts. The belt can be damaged if the right tools are not used. Internet #308384199. Model #91031.
Micro-V Stretch Fit Installation Tool - Gates 91031
Micro-V Stretch Fit Installation Tool - Gates 91031 ... The 2011-2008 Subaru Impreza, Forester and Outback with 2.5L engines utilize Stretch Fit belt technology ...
Subaru Stretch Fit Belt Tool | Gates Corporation
91031 SUBARU STRETCH FIT TOOL. Product # 74680022. Designed to assist in the installation of streetch fit belts on certain Subaru applications.